Instrucciones 1 – Aspectos básicos
When using the TSE calculation program the measured data from the tensile test (tilting angle, edge fibre strain, edge fibre compression and tensile load) are calculated proportionally to the estimated wind load, resulting in safety statements. In order to estimate the wind load a calculation program is required to determine top sail surface and wind load gravity centre.
It is based on the Stuttgarter Festigkeitskatalog [study on dynamic measurements of green wood] and the generalized tilting angle curve developed by Wessolly. Fundamental basics, equations, data catalogues and procedures are described in the book “Handbuch der Baumstatik und Baumkontrolle“ (L. Wessolly, M. Erb, Patzer Verlag 1998) used as the basis for tensile testing.
Required sensor technology and measuring equipment can be provided by Rinntech.
Los usuarios registrados pueden ejecutar el programa TSE on Line introduciendo datos independientes, con el objetivo único de familiarizarse y obtener una idea de los resultados de un test de tracción.
Por el momento el programa TSE no está preparado para llevar a cabo evaluaciones independientes (con datos no obtenidos de un test de tracción y exclusivamente teóricos) de estabilidad y seguridad contra la rotura aplicado a casos reales. Por tanto la utilización del programa (en estas circunstancias) se hace bajo la propia responsabilidad.